Kitengo cha 150 Daraja la KE / EN Vipimo vya bomba vya chuma vya kutupwa vilivyo na shanga za kawaida
- Cheti: UL Imeorodheshwa / FM Imeidhinishwa
- Uso: chuma cheusi / dimbwi la moto lililowekwa mabati
- Mwisho: Ushanga
- Chapa: P na OEM inakubalika
- Kawaida: ISO49/ EN 10242, ishara C
- Nyenzo: BS EN 1562, EN-GJMB-350-10
- Mada: BSPT / NPT
- W. shinikizo: 20 ~ 25 pau, ≤PN25
- Nguvu ya Kukaza: 300 MPA (Kiwango cha chini)
- Kurefusha: 6% Kiwango cha chini
- Mipako ya Zinki: Wastani wa 70 um, kila moja inafaa ≥63 um
Ukubwa Uliopo:
| Kipengee |
Ukubwa |
Uzito |
| Nambari |
(Inchi) |
KG |
| EBL9005 |
1/2 |
0.13 |
| EBL9007 |
3/4 |
0.253 |
| EBL9010 |
1 |
0.374 |
| EBL9012 |
1.1/4 |
0.656 |
| EBL9015 |
1.1/2 |
0.848 |
1.Molds nzito na bei za ushindani
2.Kuwa na Uzoefu wa kukusanya juu ya kuzalisha na kuuza nje tangu miaka ya 1990
Huduma ya 3.Ufanisi: Kujibu Swali ndani ya saa 4, utoaji wa haraka.
4. Cheti cha watu wengine, kama vile UL na FM, SGS.
Weka kila bomba linalofaa ambalo Wateja wetu walipokea limehitimu.
1.Swali: Je, wewe ni kiwanda au kampuni ya biashara?
A:Sisi ni kiwanda na historia ya miaka +30 katika uwanja wa akitoa.
2.Swali: Je, unaunga mkono masharti gani ya malipo?
A: Ttor L/C. Malipo ya 30% mapema, na salio la 70% lingelipwa kabla ya usafirishaji.
3.Q: Muda wako wa kujifungua ni wa muda gani?
A: Siku 35 baada ya kupokea malipo ya juu.
4.Q： Your Package？
A. Kiwango cha Kusafirisha nje. Katoni Kuu za safu 5 zenye masanduku ya ndani, Kwa ujumla Katoni 48 zimefungwa kwenye godoro, na palati 20 zilizopakiwa kwenye kontena 1 x 20”.
5. Swali: Je, inawezekana kupata sampuli kutoka kwa kiwanda chako?
A: Ndiyo. sampuli za bure zitatolewa.
6. Swali: Bidhaa zimehakikishiwa kwa miaka mingapi?
A: Kiwango cha chini cha mwaka 1.
7.Types of pipe fitting standards:
Baadhi ya viwango vinavyotumika sana vya kuweka bomba ni kama ifuatavyo:
This is one of the reputed organizations in the world developing codes and standards. The schedule number for pipe fitting starts from ASME/ANSI B16. The various classifications of ASME/ANSI B16 standards for different pipe fittings are as follows:
- ASME/ANSI B16.1 - 1998 - Cast Iron Pipe Flanges and Flanged Fittings
- ASME/ANSI B16.3 - 1998 - Malleable Iron Threaded Fittings
- ASME/ANSI B16.4 - 1998 - Cast Iron Threaded Fittings
- ASME/ANSI B16.5 - 1996 - Pipe Flanges and Flanged Fittings
- ASME/ANSI B16.11 - 2001 - Forged Steel Fittings, Socket-Welding and Threaded
- ASME/ANSI B16.14 - 1991 - Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads
- ASME/ANSI B16.15 - 1985 (R1994) - Cast Bronze Threaded Fittings
- ASME/ANSI B16.25 - 1997 - Buttwelding Ends
- ASME/ANSI B16.36 - 1996 - Orifice Flanges etc.
HABARI
